Complete Gear Data for Ordering Gear Hobbing Tools
2022-08-17 09:25:19
jiangxingTools
1696
Complete gear data for ordering gear hobbing tools
1, normal module/DP
2, No. of teeth
3, Normal pressure angle
4, Helix angle and hand
5, Outside diameter
6, Amount of tip chamfer- if applicable
7, Root flat/full fillet
8, Tip relief details-if appliable
9, DOP or MOT sizes at hobbing and finishing stage
10, Material and hardness at hobbing stage
you are going to receive quality hobs for spur and helical gears and involute splines.
相關(guān)文章
-
PA20° Inserted Blade Gear Hob with Module m12
PA20° Inserted Blade Gear Hob with Module m12Material：HSS M2, M35Tooth profile is according to DIN39... - PA30° DIN5480 Involute Spline Hob Cutter with Module m1
- PA20° Profile DIN3972 Standard Gear Hob Cutter with Module m2.75
- HSS M2, M35, M42 Material Gear Shaper Cutter with PVD Coating TiN, AP
- PA20° Pre-shaving Gear Hobber with Module m2.5
- PA20° Module m1.25 Standard Involute Gear Cutter Hob
- Bohler S590 Microclean for Hobs
