Bohler S790 Microclean for Hobs
2022-08-19 13:50:02
jiangxingTools
1998
Bohler S790 Microclean for Hobs
Material composition of S790: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30
Standard: 1.3345, HS6-5-3C, EN ISO 4957
Performance feature of Gear Hobs with S790:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: good
Edge Stability: good
Grindability: high
Hot Hardness (red hardness): good
相關(guān)文章
-
Timing Pulley Hob for S.T.D MXL(2.032)
Timing Pulley Hob for S.T.D MXL(2.032)timing belt profile: S.T.Dbelt type: MXL(2.032)common range: 1... - ASP2052 Module m1-m10 G Solid Hob with PGSP
- Round Broach
- Shank Type Worm Gear Hob with Module m6
- Characteristics of Solid Carbide Hobs
- HSS DIN 8002 Standard Solid Gear Hobs with M1~M20
- PA20° PCD 125mm Disk Type Gear Shaping Cutter with Module m4~m8
