The Method of Hob Computation
2021-08-26 13:43:54
jiangxingTools
2215
The Method of Hob Computation
Normal pitch=Mn x Π（Mn: Normal Module)
Axial pitch=Mn/cos LA
Lead=Axial pitch x Number of start
LA(Lead Angle)=sin-1(Mn x Number of start/Hob PCD)
Cam amount(relief amount)=Hob OD x Π x tan(cam angle)/Hob NT
Cam angle: Generally PA20°-10°， 14.5°-12°，25°-9°
Groove Lead=Hob PCD x Π/tan LA
Flute depth= Total tooth height if a hob+ Cam amount+1.5mm
Hob's Relief Angle=tan-1(tan PA x tan Cam angle)
相關(guān)文章
-
PA20° HSS M2, M35 Gear Cutting Hobs with Semi-Topping Tooth Profile
PA20° HSS M2, M35 Gear Cutting hobs with Semi-Topping Tooth ProfileSemi-topping tooth profile is for... - HSS M2E, M35, M42, ASP30, ASP52, S390 Module and DP Gear Shaping Tool with TiN, TiALN, AP
- Deep Counterbore Type Shaper Cutters with GB 6081
- Timing Pulley Hob for G.T
- HSS M42 Material Gear Shaper Cutter and Hobs
- Disk Type Shaper Cutters with DIN 1825
- Involute Spline Gear Hob with DIN 5482
