Information required when ordering shaper cutters
2021-08-27 11:21:59
jiangxingTools
2108
Information required when ordering shaper cutters
1, Quantity of shaper cutter
2, Type of cutter - Disc, Shank or Hub with
3, Bore diameter or type of shank fitting required.
4, Pitch - (DP, CP or Module)
5, Pressure Angle.
6, PCD - Approximate pitch circle diameter or number of teeth.
7, Material.
8, Coating.
9, Complete geara or detailed component drawings should be supplied when ordering non-standard gear shaping tools.
相關(guān)文章
-
PA20° Module m3.25 Standard Involute Gear Hobbing
PA20° Module m3.25 Standard Involute Gear HobbingTooth profile: DIN3972-2 standard, GBMaterial：HSS M... - Gear Hob Structure
- Processing Steps for Carbide Gear Hobs
- PA20° Pre-shaving Gear Hob Cutter with Module m1.75
- PA20° Standard Involute Gear Milling Cutter with Module m2
- Deep Counterbore Type Shaper Cutters with DIN 1826
- Solid Carbide Small Module Gear Hob
