Finishing disc-type shaper cutter with DIN 3972/II
2021-10-18 10:49:02
jiangxingTools
4192
Finishing disc-type shaper cutter with DIN 3972/II
Tooth profile to DIN 3972/II profile standard
Module: m0.5-m10
Number of teeth: Z14-160
Pressure angle: 20°
Bore: 20mm, 31.743mm,44.443mm
Please contact us for more module DIN3972-2 standard disc type shaper cutters from us.
相關(guān)文章
-
Taper Shank Type Shaper Cutters with GB 6081
Taper Shank Type Shaper Cutters with GB 6081These shank type shaper cutters are 20° PA, non-topping... - PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m4
- GB 6083 Standard Gear Hobs with M2+TiN
- PA20° DIN3972 Standard Gear Hob with Module m12
- PA20° Pre-shave Gear Hob with Module m1
- RS100 Roller Chain Sprocket Hob with Pitch 31.75 x Roller Dia. 19.05
- PA20° DP14 Standard Involute Hob with BPⅡ
